McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 127

5. In the Open dialog box, select the drive for the disk you just inserted, and
then click Open.
The file is copied, and the extra .DAT is installed in the Repository.
6. After the installation is complete, click Close to exit the Repository
dialog box.
Installing extra .DAT files via drag and drop
If you have installed your extra .DATs into a directory folder on a network
drive, or if you receive your extra .DATs on disks, you can install them into the
Repository by selecting the folder and dragging it onto the Products page of
the Repository dialog box.
Follow these steps to add an extra .DAT to the Repository via drag and drop:
1. On the Management Console main menu, click Tools, and then click
Repository.
The Repository dialog box appears, with the Products page showing
(Figure 5-2 on page
2. Use Windows Explorer (Windows NT 4.0) or File Manager
(Windows NT 3.51) to browse for the emergency detection driver file
(named EXTRA.DAT or EXTRA.DRV). Select the file and drag it onto the
Products page.
The files are copied, and the extra .DAT is added to the Repository.
Follow these steps to install an extra .DAT to all machines:
1. In the Management Console's anti-virus domain view, right-click
Anti-Virus Domain(s) and choose Add/Remove Components.
The Global Components dialog box appears
2. Select the extra .DAT in the right-hand pane, and click Add.
3. Click OK.
Follow these steps to install an extra .DAT to all machines in an anti-virus
domain:
1. In the Management Console's anti-virus domain view, right-click the
anti-virus domain, point to Manage Components, and choose
Add/Remove Components.
124).
Updating Your Anti-virus Software
(Figure 3-14 on page
Administrator's Guide
91).
127