McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 189

4. In the Program box, enter the name and path of the program you want
Alert Manager to run upon detection of a virus. You can enter the
program name in Universal Naming Convention (UNC) notation
\\server_name\directory_name\program_name
or click Browse to locate the program on the network.
5. To execute the program on the first alert event only, select the First Time
option. To execute the program every time an alert event occurs, select
the Every Time option.
6. Click Priority Level to specify which types of alert messages the
destination computer will receive.
7. In the Priority Level dialog box (see
slider to the right to send the destination computer fewer, but higher
priority, messages. Drag the slider to the left to send the destination
computer more network messages, including lower priority messages.
Next, click OK to save your changes and return to the Program page.
8. To test the launch of the program, click Test.
9. To configure other notification options, click a different tab. To save your
configuration options and close the Alert Manager Properties dialog box,
click OK. To close the Alert Manager Properties dialog box without
saving changes, click Cancel.
Using the Alert Manager
Figure 6-4 on page 169), drag the
Administrator's Guide 189