McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 178

Using the Alert Manager
4. Click Priority Level to specify which types of alert messages your
5. Click Modem Settings to configure your modem to send pager
178 Management Edition
Figure 6-11. Pager Properties dialog box
recipient will receive.
In the Priority Level dialog box (see
slider to the right to send the recipient fewer, but higher priority,
messages. Drag the slider to the left to send the recipient more messages,
including lower priority messages. Next, click OK to save your changes
and return to the Pager Properties dialog box.
messages. In the dialog box that appears
the type of modem connected to your server from the Modem list, the
COM port it uses from the Port list, and the rate at which it can transmit
data from the Baud list. Next, enter in the boxes provided any dialing
prefixes or suffixes the modem must dial to reach outside lines, to use
particular long-distance carriers, to enter personal identification
numbers, or to perform similar tasks.
Select the dialing method—Tone or Pulse—that you want the modem to
use, and click the Speaker Off checkbox to have the modem dial and
connect silently. Click OK to save your settings and return to the Pager
Properties dialog box.
Figure 6-4 on page 169), drag the
(Figure 6-12 on page 179), select