McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 177

• To add a pager number to the list, click Add to open the Pager
Properties dialog box
pager your recipient uses from the list at the top of the page, then
enter the information for that pager type in the boxes provided.
• If your recipient uses an alphanumeric pager, enter the pager
number and, if necessary, the recipient's ID and password in
the boxes provided. Next, select the Use Alert Message button
to send the standard alert message, or select the Use Custom
Message button and enter your custom message in the box
just below it.
• If your recipient uses a numeric pager, enter the pager number
and the numeric message you want to send in the boxes
provided. Next, enter in the Delay box the number of seconds
Alert Manager should wait before transmitting its message.
Give Alert Manager enough time to get past the initial greeting
and any other preliminary messages the paging service plays
before it accepts messages. If the service requires touch tones to
activate menu options, you may need to write a login script for
use with your modem.
To choose additional options, continue with
• To change configuration options, select one of the pager numbers in
the list, then click Properties. Alert Manager opens the Pager
Properties dialog box
information in the boxes shown, then continue with
new or different configuration options.
(Figure 6-11 on page
(Figure 6-11 on page
Using the Alert Manager
178). Choose the type of
Step 4.
178). Change any of the
Step 4 to choose
Administrator's Guide 177