Table of Contents
Advertisement
Rescanning the machines
When you believe that the virus problem has been resolved on a machine or
group of machines, or you want to disinfect any machines, you may re-scan
them.
1. For single machines, right-click the machine and choose Scan.
2. Enter any additional command-line options, and then click OK.
Viewing the virus scan status report
Whenever you request a scan, a report is generated showing the status of
every virus scan. You can view today's scan, all scans, or those within a range
of dates or times. Reports can apply to machines within any domain or
member group.
For a group of machines, right-click the anti-virus domain or Members
group, point to Scan, and select the machines to scan:
• All Machines. Select this option to acknowledge all machines in the
selected domain or group.
• Unknown, Warnings and Alerts.
acknowledge only machines in the selected domain or group that do
not have a status of all clear.
• Warnings and Alerts.
machines in the selected domain or group that have warnings and
alerts.
• Unknown Only.
machines in the selected domain or group that have an unknown
status.
• Warnings Only.
machines in the selected domain or group that have warnings.
• Alerts Only.
the selected domain or group that have alerts.
The Scan Settings dialog box appears
A dialog box appears, informing you that the scan has been dispatched.
The selected machines are re-scanned, and the virus-scan status is
re-displayed. This can take some time depending on the number of
machines.
Select this option to acknowledge only
Select this option to acknowledge only
Select this option to acknowledge only
Select this option to acknowledge only machines in
(Figure 4-8 on page
Creating Schedules
Select this option to
106).
Administrator's Guide
111
Advertisement
Table of Contents
