Sending An Alert As An Snmp Network Message - McAfee MANAGEMENT EDITION 2.5 Administrator's Manual

Sending an alert as an SNMP network message

Alert Manager can send the alert messages that your anti-virus software
generates to other computers via the Simple Network Management Protocol
(SNMP). To see the alert messages that Alert Manager sends, you must have
an SNMP management system configured with an SNMP viewer, such as
Hewlett-Packard's OpenView. To learn how to set up and configure your
SNMP management system, see the documentation for your SNMP viewer
software.
Follow these steps to send an alert as an SNMP network message:
1. Open the Alert Manager Properties dialog box.
2. Click the SNMP tab. The SNMP page appears
3. Click the Enable SNMP Traps checkbox.
4. Click Priority Level to specify which types of alert messages your SNMP
Figure 6-15. Alert Manager Properties dialog box
management computer will receive.
(Figure
(SNMP page)
Administrator's Guide
Using the Alert Manager
6-15).
183