Enabling Centralized Alerting For The Virusscan Program - McAfee MANAGEMENT EDITION 2.5 Administrator's Manual

Using the Alert Manager
4. Verify that the Enable Centralized Alerting checkbox is selected.
5. Create a share on the directory shown in the Alert Folder box, and set
W

Enabling centralized alerting for the VirusScan program

Next, you must configure VirusScan alerting. However, remember that the
VirusScan program must first be installed in the Management Edition
Repository.
Follow these steps to enable centralized alerting for the VirusScan program
for Windows NT:
1. Click the
2. Click Configure.
3. Click the Actions tab, and select the Notify Alert Manager checkbox.
4. Click OK twice to exit.
Follow these steps to enable centralized alerting for the VirusScan program
for Windows 95 and Windows 98:
1. Click the
2. Click Configure.
162 Management Edition
this to Full Control for Everyone. Note the share name you have chosen.
NOTE: If you perform the following steps before distributing anti-virus
software to your target machines, the settings will be active immediately
upon installation.
If you perform the following steps after installation of your anti-virus
software to your target machines, you must click
Configuration to save the configuration changes to your target machines
and activate alerting.
Component Configuration toolbar button, and then click
the VirusScan NT tab.
The Alert Manager NT dialog box appears.
The Alert Manager Properties dialog box appears.
Component Configuration toolbar button, and then click
the VirusScan 95 tab.
The Alert Manager NT dialog box appears.
The Alert Manager Properties dialog box appears.
Apply