McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 82

Creating Anti-virus Domains
MAP ROOT F:=SYS:PUBLIC\ME_CLNT
#AUTOINST C:\WINDOWS F:\SETUP.EXE
The login script changes an example WIN.INI file as follows:
Old WIN.INI
[WINDOWS]
RUN=NWPOPUP.EXE
AUTOINST.EXE also adds the following section and key to WIN.INI:
[NetworkAssociates]
NetworkAssociatesInstalled=Yes
This prevents AUTOINST from adding the installer's executable path to the
RUN= line more than once. If, on a subsequent server login AUTOINST runs,
it will not alter the RUN= line if it finds the NAIAVInstalled key. Without this,
users run the installer SETUP.EXE each time they log in.
W
Once the installer SETUP.EXE has installed the Management Agent on the
machine, it removes its reference from the RUN= line. This means that the
installer will run only once, no matter how many times the user logs into the
server or starts/stops Windows.
You might not want all your machines that login to a specific server to be
updated immediately. You can control this through the use of NetWare's user
groups and group membership.
Example
IF MEMBER OF ''CLIENT_INSTALL'' THEN BEGIN
END
Now, only users who are a member of the user group CLIENT_INSTALL will
be updated. To install additional machines, add each user ID to the user
group.
82 Management Edition
NOTE: If you copy the contents of the \NP250\16\Client directory to a
server directory for all network-based installations, copy the
AUTOINST.EXE utility to the same directory to simplify the automated
installation procedure.
MAP ROOT F:=SYS:PUBLIC\ME_CLNT
#F:AUTOINST C:\WINDOWS F:SETUP.EXE
New WIN. INI
[WINDOWS]
RUN=NWPOPUP.EXE F:\SETUP.EXE