McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 49

3. Configure the NetShield NetWare on-demand scanner and Alert
Manager settings. For example, you can schedule a nightly on-demand
scan of all volumes.
4. To use a different password when connecting to the servers using the
NetShield NetWare NT Console, go to the NetWare server console and
unload NETSHLD.NLM.
If you are worried about the server being unprotected, you can force
users to log off and disable connections to the server, or do this outside
normal working hours at your location.
5. Locate the NETSHLD.REG and PASSWORD.PWD files in the NetShield
installation directory (default is SYS:NETA\NETSHLD) and make
backup copies of these files.
6. Reload NETSHLD.NLM from the NetWare server so that your server
remains protected.
7. Locate the NetShield Netware product directory containing the
NETSHLD.REG and PASSWORD.PWD files in the Repository or mirror
that you will be using for the NetWare servers.
8. Rename the NETSHLD.REG from your server to CUSTOM.REG and
place it in this directory.
9. Replace the existing PASSWORD.PWD file if you wanted a different
password.
10. Be sure to also place these files in the master repository.
You should now be able to roll out the NetShield program to all your NetWare
servers with the settings you just configured.
W
NOTE: Remember, the customized .REG file must be named
CUSTOM.REG when you place it in the Repository. When the NetShield
installer creates the server installation set at Repository install time, it
creates an empty NETSHLD.REG that does not contain the default
settings; the defaults are provided by the Management Edition
configuration .DLL, which looks for a CUSTOM.REG file in the
Repository first.
Installing the Management Edition Program
Administrator's Guide 49