Table of Contents
Advertisement
3. In the anti-virus domain view, right-click the machine, group, or
4. Select the components you want to add in the right-hand pane, and click
5. Click OK to close the dialog box.
6. In the anti-virus domain view, right-click the machine, group, or
7. If you install the on-access scanner, you must reboot the target machine.
8. If you install to a Windows 95, Windows 98, or Windows for
Using the Batch Install
W
anti-virus domain to which you want to install. Point to Manage
Components, and choose Add/Remove Components.
The Components dialog box appears
Add.
anti-virus domain, and choose Apply Configuration.
The Management Console copies the files from the Repository to each of
the member machines. The Repository may be a master, a mirror, or a
linked repository. The Management Console copies the Management
Agent to the member machine. It also copies a configuration file listing
all the files you've selected for installation on the member machine.
The Management Agent starts on the member machine, reads the
configuration file and finds out which anti-virus components to copy. It
then attaches to the Repository and copies the files.
On Windows NT machines, the Management Console will start the
components remotely.
Workgroups 3.11 member machine for the first time, you must reboot the
machine to complete the installation.
When the configuration update is complete, the display text becomes
bold.
NOTE: Batch Install cannot be used for the initial installation to a newly
managed machine.
Before using the Batch Install method, you must click the Management
Server and choose Apply Configuration; otherwise, the installation will
fail.
Updating Your Anti-virus Software
(Figure 5-6 on page
Administrator's Guide
128).
141
Advertisement
Table of Contents
