Installation Steps - McAfee MANAGEMENT EDITION 2.5 Administrator's Manual

Installing the Management Edition Program

Installation steps

È
Once you have selected one of the four installation options discussed above,
complete the following installation procedure.
Follow these steps to install the Management Console:
1. Before installation, make sure that the machine you are running is
2. Start your PC and log on with a user name in the Domain Administrator
3. Insert the Management Edition CD-ROM into the drive.
4. Click Start on your Windows taskbar, and then click Run.
5. Enter SETUP.EXE in the text box, and then click OK.
30 Management Edition
IMPORTANT: If you are upgrading from version 2.0 to version 2.5 of the
Management Edition program, you must install your new version to the
same folder as your previous version to preserve your anti-virus domain
configuration.
If you are upgrading from version 1.5 to version 2.0 or later, you must
install the new version to a different folder than the previous version;
otherwise, you cannot proceed with the installation until you remove
previous versions of the Management Edition program from your hard
drive. However, before you remove previous versions of the
Management Edition program, be sure to preserve your anti-virus
domain structure by using the Import Domain command on the File
menu.
The Management Console for version 2.5 of the Management Edition
program runs only on Windows NT 4.0.
virus-free. Refer to the relevant anti-virus product manual.
group.