McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 225

The Repository dialog box appears, with the Products page showing
(Figure 8-2 on page
6. Click the Mirrors tab.
The Mirrors page appears
7. Right-click the name of the mirror repository you want to configure, and
choose Configure Mirror.
The Repository Configuration dialog box appears
223).
8. Type a description of the mirror repository in the Description box.
9. Complete the Administrator/Supervisor Login Information section, as
in the next sections for either a NetWare 3.x or 4.x server.
Follow these steps to configure a mirror repository on a NetWare 4 .x server:
Complete the Administrator/Supervisor Login Information section of the
Repository Configuration dialog box, as follows:
1. Enter the NDS tree name that contains the server in the Domain/Tree
box. For example, ABC_CORP.
The specified user ID must match that given full access to the \REPO
directory.
If any of your clients updating from this mirror repository are using
bindery-based NetWare 3.x-compatible clients only, or if you have
NetWare 3.x servers updating from this mirror repository, you must
enable bindery emulation on the server containing the mirror repository
and specify a user name within the bindery-emulation container in the
Username box.
For example, bindery emulation is set to CONTAINER.ORG .
Username is USER , which refers to the NDS user object
USER.CONTAINER.ORG .
2. If the account requires a password for access, enter the password in the
Password and Confirm Password boxes.
3. Repeat steps 1 and 2 for the Client Login Information section, but
specify the user ID that has read and file-scan access to the \REPO
directory and full access to the \UPGRADES directory.
Using Mirror and Linked Repositories
215).
(Figure 8-3 on page 216).
(Figure 8-7 on page
Administrator's Guide 225