Table of Contents
Advertisement
15. In the Repository Setup dialog box, click OK.
16. Select NetWare, and click OK.
17. Click Yes to set up the mirror repository.
18. Click Close.
You now need to indicate which repository is used by which domain, group,
or machine.
Assigning different repositories
Follow these steps to assign a different repository:
1. Right-click the domains, groups, or machines that you want to assign to
2. Point to Manage Components, and click Component Configuration.
3. Select the Upgrade Settings checkbox, and click the Upgrade tab.
4. Select a repository from the drop-down list.
5. If the repository and the machines that will use it for updates are on the
6. Click OK.
Alternatively, you can specify the details manually. You must specify a
UNC path, for example: \\MACHINE\SYS\UPGRADES.
You are prompted by the Query Machine Type dialog box to select the
type of operating system the target machine uses
217).
You are prompted to update the mirror repository.
Its name is added to the Mirrors page
a different repository.
The Component Configuration dialog box appears .
other end of a WAN link, deselect the Show progress on client
machines when updating checkbox. Doing so will prevent the
Management Console from trying to access the machines to determine
their update progress.
Using Mirror and Linked Repositories
(Figure 8-5 on page
(Figure 8-3 on page
Administrator's Guide
216).
221
Advertisement
Table of Contents
