Table of Contents
Advertisement
Error
level
4
none
Follow these steps to initiate an update via login script:
1. In the Management Console's main menu, click Tools, and then click
2. Click
3. Select the Update from login script option, and click OK.
Globally applying configuration
After you have chosen your required installation or update method, it will be
used the next time you click Apply Configuration.
With Push On and Pull Off installations, if you click Apply Configuration, the
Management Console repeats failed updates until they succeed. This is useful
if you don't mind leaving the Management Console running for a long time,
and if you expect some updates to fail initially, probably because the machines
have not been turned on.
With Batch Install installations, updates proceed as configured on the Batch
Install dialog box.
Configuring reboot options
You can prompt users to reboot, or prompt users and force a reboot according
to parameters that you set. You can apply these parameters at a domain,
member group, or individual machine level of the hierarchy. However, reboot
options apply only to Windows-based clients, not NetWare servers.
Follow these steps to configure reboot options:
1. In the anti-virus domain view, right-click
Error code
ERR_INTEGRITY_FAILURE
UNKNOWN
Batch Install.
Apply Configuration.
The Batch Install dialog box appears
choose Component Configuration.
Updating Your Anti-virus Software
Description
This file has failed its integrity
check.
Unknown error.
(Figure 5-13 on page
Anti-Virus Domain(s) and
Administrator's Guide
143).
153
Advertisement
Table of Contents
