Configuring Mcafee Dlp Appliances And Adding Servers; Configure Mcafee Dlp Appliances Using Setup Wizard - McAfee DTP-1650-MGRA - Network DLP Manager 1650 Appliance Installation Manual

4 4
Configuring McAfee DLP appliances and
adding servers
All McAfee DLP appliances can be registered to McAfee DLP Manager and managed from that console.
After the appliances are configured, servers that extend the functionality of the system can be added.
At the very least, an NTP server must be added during the installation process.
Most McAfee DLP enterprise configurations have LDAP servers configured, and McAfee
is often used in addition to resolve the identities of specific users.
After installation of McAfee DLP Monitor, McAfee strongly recommends adding capture filters to
customize the system. Some default filters are provided to filter out extraneous data that would
ordinarily be captured, but each installation has a unique protection strategy that requires different
settings. Consult the McAfee Total Protection for Data Loss Prevention 9.2.0 Product Guide for more
information.
Contents

Configure McAfee DLP appliances using Setup Wizard

Configure McAfee DLP appliances after installation
Add McAfee DLP products to McAfee DLP Manager
Configuring McAfee DLP Prevent
Add LDAP servers to McAfee DLP Manager
Add McAfee Logon Collector to McAfee DLP Manager
Add syslog servers to McAfee DLP systems
Resynchronize McAfee DLP systems with an NTP server
Testing the system
Configure McAfee DLP appliances using Setup Wizard
After installing the appliances, configure them by running the Setup Wizard.
Before you begin
The software for the appliance to be configured must already be installed on the appliance.
Task
Open a web browser and start the application using the IP address.
1
# https://xxx.xxx.xxx.xxx
McAfee Data Loss Prevention 9.2.1
After installation is complete, you can start the Setup Wizard from the Configure link on the System page if
you want to make changes.
Logon Collector
®
Installation Guide 29