Adding Or Removing Components For All Anti-Virus Domains - McAfee MANAGEMENT EDITION 2.5 Administrator's Manual

Adding or removing components for all anti-virus domains

Follow these steps to select anti-virus components for all anti-virus domains:
1. In the anti-virus domain view, right-click
2. Add components to the Selected list from the Available list. You can
3. Click OK to set the components required for every machine in the
4. Right-click the anti-virus domain name and choose Apply
5. When you are prompted by the dialog box, click Yes to start the
select Add/Remove Components.
The Global Components dialog box appears
Figure 3-16. Global Components dialog box
double-click components in either list to move them to the opposite list;
select the components, and click Add or Remove; or click and drag them
to the other list.
anti-virus domain.
In the anti-virus domain view, the components appear in normal type
(rather than bold type) to show that you have configured them but you
have not yet installed them. This feature allows you to adjust the
configuration before you eventually install the components.
Configuration.
installation of components to the member machines.
Creating Anti-virus Domains
Anti-Virus Domain(s) and
(Figure 3-16).
Administrator's Guide 93