McAfee MANAGEMENT EDITION 2.5 Administrator's Manual page 80

Creating Anti-virus Domains
This information can be configured within the NAMEPROV.INI file prior to
running the installer, or afterwards, when the Management Agent will request
it.
This is the basic template NAMEPROV.INI file as supplied with the installer:
; This is the section header that needs to be used. This
; is mandatory.
[NameProv]
; NP_DOMAIN is the name of the AV domain that this name
; provider is located in.
; This entry is mandatory.
;NP_DOMAIN=A_DOMAIN
; NP_ADDR1 and NP_ADDR2 hold the addresses of the machine
; that the name provider is located on. Specify either IP
; or IPX. If you only want to specify a single address,
; then you must use NP_ADDR1.
; These entries are optional. The format is #IP#<address>,
; where <address> is an IP address in decimal notation
; (a.b.c.d), or #IPX#<network>:<node>, where <network> is
; the IPX network segment address that the machine resides
; on and <node> is the machine's IPX node address.
;NP_ADDR1=#IP#192.168.1.2
;NP_ADDR2=#IPX#10a2:0020AFB4B76B
; NP_COMMENT is the comment associated with the machine.
; This entry is optional.
;NP_COMMENT=Machine comments
To pre-configure this file, you must indicate the domain name in the
NP_DOMAIN parameter. Do not enclose the domain name in quotes, even if
it contains spaces. If you alter the currently supplied line, remove the
semicolon prefixing NP_DOMAIN so that the line is no longer treated as a
comment.
NP_DOMAIN is the only mandatory parameter. If you supply only this
parameter, the Management Agent sends out a broadcast around your
network to locate the Management Server for this domain. This only occurs the
first time the Management Agent starts up. Once it has a computer name from
the Name Provider, it does not repeat this process.
80 Management Edition