Table of Contents
Advertisement
Installing VirusScan Software
Preparing to install VirusScan software
After inserting the McAfee VirusScan on your CD-ROM drive , you should see
a VirusScan welcome image appear automatically. To install VirusScan
software immediately, click Install VirusScan, then skip to Step 4 on page 16
to continue with Setup. If the welcome image does not appear, or if you are
installing VirusScan software from files you downloaded, start with Step 2 on
page 15.
Ë
Installation options
The "Installation steps"section describes how to install VirusScan software
with its most common options on a single computer or workstation. You can
choose to do a Typical setup—which installs commonly used VirusScan
components but leaves out some VShield modules and the ScreenScan
utility—or you can choose to do a Custom setup, which gives you the option
to install all VirusScan components.
Installation steps
McAfee recommends that you first quit all other applications you have
running on your system before you start Setup. Doing so reduces the
possibility that software conflicts will interfere with your installation.
To install VirusScan software, follow these steps:
1. If your computer runs Windows NT Workstation v4.0 or Windows 2000
14
McAfee VirusScan
IMPORTANT: Because Setup installs some VirusScan files as services on
Windows NT Workstation v4.0 and Windows 2000 Professional systems,
you must log in to your system with Administrator rights to install this
product. To run Setup on Windows 95 or Windows 98, you do not need
to log in with any particular profile or rights.
Professional, log on to your system as Administrator. You must have
administrative rights to install VirusScan software on your system.
Advertisement
Table of Contents
