Installing Virusscan Enterprise; Using The Setup Utility To Install Program Files - McAfee VIRUSSCAN 8.7I Installation Manual

3

Installing VirusScan Enterprise

VirusScan Enterprise 8.7i installs on workstations and servers.
See
installation.
Note
Install the product software using one of these methods:
Using the Setup utility to install program
Using the command line to install program files on page

Using the Setup utility to install program files

Use the Setup utility that comes with the product to install the product software.
1 Start the Setup utility using one of these methods:
Method
Product CD
Command line
Windows
Explorer
Pre-Installation Information on page 8
Description
1 Insert the CD into the CD-ROM drive.
2 In the autorun window, select the product that you want to install.
3 Follow the instructions in the installation wizard to install the product.
Start Run
1 Click , then select
2 Type <X>:\SETUP.EXE in the
Notes and Tips
Here, <X>: represents the drive letter for your CD-ROM, or the path of the
folder that contains the extracted program files. If your copy of the
software came on a product suite CD, you must also specify which folder
contains the specific software package.
1 Browse to the location where you extracted the program files.
2 Double-click . .
SETUP EXE
3 Follow the instructions in the installation wizard to install the product.
14
for information about preparing for
files.
18.
.
Run OK
dialog box, then click .