When The Switch Acts As An Ssh Client And The Authentication Type Is Password - H3C LS-5100-16P-SI-OVS-H3 Configuration

SSH
H3C Low-End Ethernet Switches Configuration Examples
Figure 3-13 SSH client interface
3.1.3 When the Switch Acts as an SSH Client and the Authentication Type is
Password
I. Network requirements
As shown inFigure 3-14, establish an SSH connection between Switch A (SSH Client)
and Switch B (SSH Server) for secure data exchange. The user name for login is
client001 and the SSH server's IP address is 10.165.87.136. Password authentication
is required.
II. Network diagram
Figure 3-14 Network diagram of SSH client configuration when using password
authentication
III. Configuration procedure
1) Configure Switch B
# Create a VLAN interface on the switch and assign an IP address, which the SSH
client will use as the destination for SSH connection.
Chapter 3 SSH Configuration Example
3-12