H3C LS-5100-16P-SI-OVS-H3 Configuration page 159

Routing
H3C Low-End Ethernet Switches Configuration Examples
# Run RIPv2 on VLAN-interface 14 and VLAN-interface 662.
[S300_A] interface vlan-interface 14
[S300_A-Vlan-interface14] rip version 2
[S300_A-Vlan-interface14] quit
[S300_A] interface vlan-interface 662
[S300_A-Vlan-interface662] rip version 2
[S300_A-Vlan-interface662] quit
Configure S300_B.
# Run RIP on the interfaces connected to networks 162.1.0.0 and 166.1.0.0.
<S300_B> system-view
[S300_B] rip
[S300_B-rip] network 162.1.0.0
[S300_B-rip] network 166.1.0.0
# Disable RIPv2 route summarization.
[S300_B-rip] undo summary
[S300_B-rip] quit
# Run RIPv2 on VLAN-interface 623, VLAN-interface 624, and VLAN-interface 662.
[S300_B] interface vlan-interface 623
[S300_B-Vlan-interface623] rip version 2
[S300_B-Vlan-interface623] quit
[S300_B] interface vlan-interface 624
[S300_B-Vlan-interface624] rip version 2
[S300_B-Vlan-interface624] quit
[S300_B] interface vlan-interface 662
[S300_B-Vlan-interface662] rip version 2
[S300_B-Vlan-interface662] quit
II. Basic OSPF configuration
Figure 3-3 shows the relevant network diagram of AS 200.
Chapter 3 Comprehensive Configuration
3-6
Example