Ospf Configuration - H3C LS-5100-16P-SI-OVS-H3 Configuration

Routing
H3C Low-End Ethernet Switches Configuration Examples

1.2.4 OSPF Configuration

Table 1-20 OSPF configuration tasks
Basic OSPF configuration
OSPF area attribute configuration
OSPF network
type configuration
OSPF route
control
OSPF network
adjustment and
optimization
Configuration task
Configuring the network type of
an OSPF interface
Configuring an NBMA/P2MP
neighbor
Configuring the DR priority on an
OSPF interface
Configuring OSPF route
summarization
Configuring OSPF to filter
received routes
Configuring OSPF interface cost
Configuring OSPF route priority
Configuring the maximum
number of OSPF ECMP routes
Configuring OSPF to redistribute
external routes
Configuring OSPF timers
Configuring the LSA transmission
delay
Configuring the SPF calculation
interval
Disabling OSPF packet
transmission on an interface
Configuring OSPF authentication
Configuring the MTU field in DD
packets
Enabling OSPF logging of
neighbor state changes
Configuring OSPF network
management
1-9
Chapter 1 Routing Overview
Related
Remarks
section
Required 1.2.4 I.
Optional 1.2.4 II.
Optional 1.2.4 III.
Optional 1.2.4 IV.
Optional 1.2.4 V.
Optional 1.2.4 VI.
Optional 1.2.4 VII.
Optional 1.2.4 VIII.
Optional 1.2.4 IX.
Optional 1.2.4 X.
Optional 1.2.4 XI.
Optional 1.2.4 XII.
Optional 1.2.4 XIII.
Optional 1.2.4 XIV.
Optional 1.2.4 XV.
Optional 1.2.4 XVI.
Optional 1.2.4 XVII.
Optional 1.2.4 XVIII.
Optional 1.2.4 XIX.