H3C LS-5100-16P-SI-OVS-H3 Configuration page 207

Multicast
H3C Low-End Ethernet Switches Configuration Examples
Configure the MSDP peer
connection retry period
III. Configuring SA message delivery
Complete these tasks to configure SA message delivery:
Configure the RP address in SA message
Configure the SA message cache
Configure SA message transmission and filtering
Configure a rule for filtering multicast sources in SA messages
Configure a filtering rule for receiving or forwarding SA messages
1) Configure the RP address in SA messages
Follow these steps to configure the RP address in SA messages:
To do...
Enter system view
Enter MSDP view
Configure the RP
address in SA
messages
Note:
In Anycast RP application, C-BSR and C-RP must be configured on different devices or
ports.
2) Configure the SA message cache
Follow these steps to configure the SA message cache:
Enter system view
Enter MSDP view
To do...
timer retry seconds
Configuration task
Use the command...
system-view
msdp
originating-rp
interface-type
interface-number
To do...
system-view
msdp
Chapter 1 Multicast Protocol Overview
Use the command...
—
—
Optional
By default, the RP address in an
SA message is the PIM RP
address.
Use the command...
1-16
Remarks
Optional
The system default is 30
seconds.
Remarks
Optional
Optional
Optional
Optional
Optional
Remarks
Remarks
—
—