H3C LS-5100-16P-SI-OVS-H3 Configuration page 304

H3C Low-End Ethernet Switches Configuration Examples
ARP Attack Prevention
[Gateway-Vlan-interface10] ip address 192.168.0.1 24
[Gateway-Vlan-interface10] quit
# Configure the IP address of VLAN-interface 20 as 192.168.1.1/24.
[Gateway] interface vlan 20
[Gateway-Vlan-interface20] ip address 192.168.1.1 24
[Gateway-Vlan-interface20] quit
IV. Configure the RADIUS server (CAMS 2.10-R0210)
1) Enter the correct username and password on the login page to log in to the CAMS
server.
2) Create a service type.
Log in the CAMS server configuration page, and then select Service Management >
Service Config from the navigation tree to enter the Service Config page, as shown in
the following figure.
Figure 2-4 Service Config page
Click Add to enter the Add Service page.
Enter Host for Service Name in the Basic Info field.
Select CAMS-compliant client only in the Client Configuration field and select
Unlimited for Ways to Obtain IP Addresses.
Chapter 2 Configuration Examples
2-11