H3C LS-5100-16P-SI-OVS-H3 Configuration page 109

Routing
H3C Low-End Ethernet Switches Configuration Examples
X. Configuring RIP to redistribute routes from another protocol
Table 1-14 Configure RIP to import routes from another protocol
Enter system view
Enter RIP view
Configure a default cost
for an incoming route
Configure RIP to
redistribute routes from
another protocol
XI. Configuring RIP timers
Table 1-15 Configure RIP timers
Operation
Enter system view
Enter RIP view
Set the RIP timers
XII. Configuring split horizon
Table 1-16 Configure split horizon
Enter system view
Enter interface view
Enable split horizon
Operation
system-view
rip
default cost value
import-route protocol
[ process-id ] [ cost value
| route-policy
route-policy-name ]*
system-view
rip
timers { update
update-timer | timeout
timeout-timer } *
Operation
system-view
interface interface-type
interface-number
rip split-horizon
Command
Command
—
—
Required
By default, the Update timer is
set 30 seconds and the
Timeout timer to 180 seconds.
Command
1-7
Chapter 1 Routing Overview
Remarks
—
—
Optional
1 by default.
Required
By default, RIP does
redistribute any route
from other protocols.
Remarks
Remarks
—
—
Required
Enabled by default.