H3C LS-5100-16P-SI-OVS-H3 Configuration page 128

Routing
H3C Low-End Ethernet Switches Configuration Examples
Configure
BGP timer
Configure the interval at which
a peer group sends the same
route update packet
Configure the number of route
prefixes that can be learned
from a BGP peer/peer group
Perform soft refreshment of
BGP connection manually
Configure BGP to perform
MD5 authentication when
establishing TCP connection
Operation
Configure the
Keepalive time
and Holdtime of
BGP.
Configure the
Keepalive time
and holdtime of a
specified
peer/peer group.
Command
timer keepalive
keepalive-interval
hold holdtime-interval
peer { group-name |
ip-address } timer
keepalive
keepalive-interval
hold holdtime-interval
peer group-name
route-update-interva
l seconds
peer { group-name |
ip-address }
route-limit
prefix-number
[ { alert-only |
reconnect
reconnect-time } |
percentage-value ] *
return
refresh bgp { all |
ip-address | group
group-name }
[ multicast ] { import |
export }
system-view
bgp as-number
peer { group-name |
ip-address }
password { cipher |
simple } password
1-26
Chapter 1 Routing Overview
Description
Optional
By default, the keepalive
time is 60 seconds, and
holdtime is 180
seconds. The priority of
the timer configured by
the timer command is
lower than that of the
timer configured by the
peer time command.
Optional
By default, the interval at
which a peer group
sends the same route
update packet to IBGP
peers is 15 seconds,
and to EBGP peers is 30
seconds.
Optional
By default, there is no
limit on the number of
route prefixes that can
be learned from the BGP
peer/peer group.
—
Optional
Enter BGP view again
Optional
By default, BGP dose
not perform MD5
authentication when
establishing TCP
connection.