H3C S3610 Series Operation Manual
H3C S3610 Series Operation Manual

H3C S3610 Series Operation Manual

Oam
Hide thumbs Also See for S3610 Series:

Advertisement

Operation Manual - OAM
H3C S3610&S5510 Series Ethernet Switches
Chapter 1 OAM Configuration...................................................................................................... 1-1
1.1 OAM Overview................................................................................................................... 1-1
1.1.1 Types of OAMPDUs................................................................................................ 1-1
1.1.2 OAM Connection Establishment ............................................................................. 1-2
1.1.3 Standards and Protocols......................................................................................... 1-4
1.2 OAM Configuration ............................................................................................................ 1-5
1.2.1 OAM Configuration Task List .................................................................................. 1-5
1.2.2 Configuring Basic OAM Basic Functions ................................................................ 1-5
1.2.4 Enabling OAM Loopback Testing............................................................................ 1-7
1.3 Displaying and Maintaining OAM Configuration ................................................................ 1-8
1.4 OAM Configuration Example ............................................................................................. 1-9

Table of Contents

i
Tabel of Contents

Advertisement

Table of Contents
loading

Summary of Contents for H3C S3610 Series

  • Page 1: Table Of Contents

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Tabel of Contents Table of Contents Chapter 1 OAM Configuration...................... 1-1 1.1 OAM Overview........................1-1 1.1.1 Types of OAMPDUs....................1-1 1.1.2 OAM Connection Establishment ................1-2 1.1.3 Standards and Protocols..................1-4 1.2 OAM Configuration ......................
  • Page 2: Chapter 1 Oam Configuration

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration Chapter 1 OAM Configuration When performing OAM configuration, go to these sections for information you are interested in: OAM Overview OAM Configuration Displaying and Maintaining OAM Configuration OAM Configuration Example 1.1 OAM Overview...
  • Page 3: Oam Connection Establishment

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration The Source addr field holds the source MAC address of an OAMPDU, which is the bridge MAC address of the sending side. The Type field indicates the protocol type of an OAMPDU, which is fixed to 0x8809.
  • Page 4 Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration As for OAM connection establishment, a device can operate in two modes: active OAM mode and passive OAM mode. Only devices operating in active OAM mode can initiate OAM connection establishment processes.
  • Page 5: Standards And Protocols

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration Table 1-2 OAM link error events OAM link events Description A signal error event occurs if the number of signal errors in Error signal event specific period exceeds the threshold.
  • Page 6: Oam Configuration

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration 1.2 OAM Configuration 1.2.1 OAM Configuration Task List Complete the following tasks to configure OAM: Task Remarks Configuring Basic OAM Basic Functions Required Configuring the Periods and Thresholds for OAM Link...
  • Page 7: Configuring The Periods And Thresholds For Oam Link Error Event Detection

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration 1.2.3 Configuring the Periods and Thresholds for OAM Link Error Event Detection Follow these steps to configure the periods and thresholds for OAM link error event detection: To do…...
  • Page 8: Enabling Oam Loopback Testing

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration Note: An error signal event occurs when a period for error signal event detection expires and the number of the signal errors occurred on an Ethernet port is larger than or (equal to) the threshold for error signal event detection.
  • Page 9: Displaying And Maintaining Oam Configuration

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration Note: Currently, OAM external loopback is only available on 1000 Mbps Ethernet ports (SFP ports with electrical ports installed not included) operating at a speed of 1000 Mbps, 100 Mbps, or 10 Mbps.
  • Page 10: Oam Configuration Example

    Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration 1.4 OAM Configuration Example I. Network requirements Enable OAM on Device A and Device B to manage links on data link layer. Monitor link performance and collect statistics about the error frames received by Device A.
  • Page 11 Operation Manual – OAM H3C S3610&S5510 Series Ethernet Switches Chapter 1 OAM Configuration Errored-frame-period Event threshold Errored-frame-seconds Event period Errored-frame-seconds Event threshold : Configure Device B: # Configure Ethernet 1/0/1 to operate in active OAM mode (the default OAM mode) and enable OAM for it.

This manual is also suitable for:

S5510 series

Table of Contents