H3C LS-5100-16P-SI-OVS-H3 Configuration page 53

802.1x
H3C Low-End Ethernet Switches Configuration Examples
Proxy trap checker is disabled
Proxy logoff checker is disabled
Version-Check is disabled
The port is an authenticator
Authentication Mode is Auto
Port Control Type is Port-based
ReAuthenticate is disabled
Max number of on-line users is 256
Authentication Success: 0, Failed: 0
EAPOL Packets: Tx 0, Rx 0
Sent EAP Request/Identity Packets : 0
Received EAPOL Start Packets : 0
Controlled User(s) amount to 0
[H3C] display radius scheme cams
SchemeName
Primary Auth IP
Primary Acct IP
Second
Second
Auth Server Encryption Key= expert
Acct Server Encryption Key= expert
Accounting method = required
Accounting-On packet enable, send times = 15 , interval = 3s
TimeOutValue(in second)=3 RetryTimes=3 RealtimeACCT(in minute)=12
Permitted send realtime PKT failed counts
Retry sending times of noresponse acct-stop-PKT =500
Quiet-interval(min)
Username format
Data flow unit
Packet unit
unit 1 :
Primary Auth State=active,
Primary Acc
[H3C] display domain abc
The contents of Domain abc:
EAP Request/Challenge Packets: 0
EAPOL LogOff Packets: 0
EAP Response/Identity Packets : 0
EAP Response/Challenge Packets: 0
Error Packets: 0
=cams
=192.168.1.19
=192.168.1.19
Auth IP =192.168.1.20
Acct IP =192.168.1.20
State=active,
Chapter 3 Enterprise Network Access
Authentication Configuration Example
Index=1
Port=1812
Port=1813
Port=1812
Port=1813
Second Auth State=active
Second Acc State=active
3-4
Type=extended
=5
=5
=with-domain
=Byte
=1