H3C LS-5100-16P-SI-OVS-H3 Configuration page 199

Multicast
H3C Low-End Ethernet Switches Configuration Examples
III. Configuring parameters related to IGMP queries
Follow these steps to configure parameters related to IGMP queries:
Enter system view
Enter VLAN interface
view
Configure IGMP query
interval
Configure the IGMP last
member query interval
Configure the IGMP last
member query count
Configure the IGMP other
querier present interval
Configure the maximum
response time
IV. Configuring the maximum allowed number of multicast groups
Follow these steps to configure the maximum number of multicast groups allowed to be
joined on an interface:
Enter system view
Enter VLAN interface
view
Configure the maximum
number of multicast
groups allowed on the
interface
To do...
system-view
interface Vlan-interface
interface-number
igmp timer query
seconds
igmp
lastmember-queryinterv
al seconds
igmp robust-count
robust-value
igmp timer
other-querier-present
seconds
igmp
max-response-time
seconds
To do...
system-view
interface Vlan-interface
interface-number
igmp group-limit limit
Chapter 1 Multicast Protocol Overview
Use the command...
Use the command...
1-8
Remarks
—
—
Optional
The system default is 60
seconds.
Optional
The system default is 1
second.
Optional
The system default is two.
Optional
The system default is 120
seconds, twice the
interval specified by the
igmp timer query
command.
Optional
The system default is 10
seconds.
Remarks
—
—
Required
The system default is 256.