Routing
H3C Low-End Ethernet Switches Configuration Examples
Enter interface view
Configure the DR priority
on the OSPF interface
VI. Configuring OSPF Route Summarization
Table 1-26 Configure ABR route summarization
Operation
Enter system view
Enter OSPF view
Enter area view
Enable ABR route
summarization
Table 1-27 Configure ASBR route summarization
Operation
Enter system view
Enter OSPF view
Enable ASBR route
summarization
VII. Configuring OSPF to Filter Received Routes
Table 1-28 Configure OSPF to filter received routes
Enter system view
Enter OSPF view
Operation
interface interface-type
interface-number
ospf dr-priority priority
system-view
ospf [ process-id
[ router-id router-id ] ]
area area-id
abr-summary ip-address
mask [ advertise |
not-advertise ]
system-view
ospf [ process-id
[ router-id router-id ] ]
asbr-summary ip-address
mask [ not-advertise | tag
value ]
Operation
system-view
ospf [ process-id
[ router-id router-id ] ]
Command
Command
Command
Command
1-12
Chapter 1 Routing Overview
Remarks
—
Optional
The default DR priority is 1.
Remarks
—
—
—
Required
This command takes effect only
when it is configured on an
ABR. By default, this function is
disabled on an ABR.
Remarks
—
—
Required
This command takes effect
only when it is configured on an
ASBR. By default,
summarization of imported
routes is disabled.
Remarks
—
—