H3C LS-5100-16P-SI-OVS-H3 Configuration page 31

QACL
H3C Low-End Ethernet Switches Configuration Examples
Configuration
Configure
scheduling algorithm in
port view
Configure redirection
Reference an ACL for
traffic identification, and
measure the traffic of the
matching packets
queue-scheduler { wfq
queue0-width
queue1-width
queue2-width
queue3-width
queue4-width
queue5-width
a queue queue6-width
queue7-width
queue0-weight
queue1-weight
queue2-weight
queue3-weight
queue4-weight
queue5-weight
queue6-weight
queue7-weight }
traffic-redirect
{ inbound | outbound }
acl-rule { cpu | interface
interface-type
interface-number }
traffic-statistic inbound
acl-rule
1-5
Command
| wrr
A
forwarded normally if it is
redirected to the CPU.
—
Chapter 1 QACL Overview
Remarks
The queue
scheduling
algorithm defined
using the
queue-scheduler
command in
Ethernet port view
will work on the
current port only.
In the globally
defined WRR or
WFQ queue
scheduling
algorithm, you can
modify the weight or
bandwidth in port
view if the weight or
bandwidth of each
queue cannot
satisfy the needs of
a port.
Queue weight or
bandwidth defined
in port view take
priority over the
global settings.
The queue weight or
bandwidth defined
in port view cannot
be displayed using
the display
queue-scheduler
command.
packet cannot be