H3C LS-5100-16P-SI-OVS-H3 Configuration page 277

QinQ
H3C Low-End Ethernet Switches Configuration Examples
Assigning SVLANs 100, 101, and 102 for Customer 1 to transmit high, normal, and
low priority traffic respectively.
Assigning SVLANs 200, 201, 202 for Customer 2 to transmit high, normal, and low
priority traffic respectively.
Transmitting the multicast traffic of the two customers over VLAN 500.
Table 2-1 Configure QinQ on the S3600-1 as follows:
Port
Ethernet
1/0/10
Ethernet
1/0/20
QinQ function
Enable selective
QinQ
Enable basic QinQ
Set the TPID on the
port to 9100
Configure
inter-VLAN MAC
address replicating to
reduce QinQ frame
broadcast
Enable selective
QinQ
Enable basic QinQ
Set the TPID on the
port to 9100
Configure
inter-VLAN MAC
address replicating to
reduce QinQ frame
broadcast
2-3
Chapter 2 Configuration Examples
For inbound traffic
Inner-outer VLAN
mappings (CVLANs
to SVLAN)
20 – 100 to 100 (high
priority)
200 – 300 to 101
(normal priority)
400 to 102 (low
priority)
Untagged multicast
traffic to VLAN 500
—
Replicate MAC
address entries
between the default
VLAN and the outer
VLANs
300 – 350 to 200 (high
priority)
400 – 450 to 201
(normal priority)
100 to 202 (low
priority)
Untagged multicast
traffic to VLAN 500
—
Replicate MAC
address entries
between the default
VLAN and the outer
VLANs
For outbound
traffic
Forward traffic with
the outer VLAN tag
removed.
Forward traffic with
the outer VLAN tag
removed.