H3C LS-5100-16P-SI-OVS-H3 Configuration page 118

Routing
H3C Low-End Ethernet Switches Configuration Examples
XIV. Configuring the SPF Calculation Interval
Table 1-35 Configure the SPF calculation interval
Enter system view
Enter OSPF view
Configure the SPF
calculation interval
XV. Disabling OSPF Packet Transmission on an Interface
Table 1-36 Disable OSPF packet transmission on an interface
Enter system view
Enter OSPF view
Disable OSPF packet
transmission on a
specified interface
XVI. Configuring OSPF Authentication
Table 1-37 Configure OSPF authentication
Enter system view
Enter OSPF view
Enter OSPF area view
Configure the
authentication mode of
the OSPF area
Return to OSPF view
Return to system view
Enter interface view
Operation
system-view
ospf [ process-id
[ router-id router-id ] ]
spf-schedule-interval
interval
Operation
system-view
ospf [ process-id
[ router-id router-id ] ]
silent-interface
silent-interface-type
silent-interface-number
Operation
system-view
ospf [ process-id
[ router-id router-id ] ]
area area-id
authentication-mode
{ simple | md5 }
quit
quit
interface interface-type
interface-number
Command
Command
Command
1-16
Chapter 1 Routing Overview
Remarks
—
—
Optional
By default, the SPF
calculation interval is five
seconds.
Remarks
—
—
Optional
By default, all the
interfaces are allowed to
transmit OSPF packets.
Remarks
—
—
—
Required
By default, no
authentication mode is
configured for an area.
—
—
—