H3C LS-5100-16P-SI-OVS-H3 Configuration page 41

QACL
H3C Low-End Ethernet Switches Configuration Examples
Telnet/SNMP/WEB login user control. For Telnet users, ACLs 2000 to 4999 may
be referenced, and for SNMP/WEB users, ACLs 2000 to 2999 may be referenced.
ACLs 2000 to 3999 can be referenced for routing policy match.
ACLs 2000 to 3999 can be referenced for filtering route information.
ACLs 2000 to 3999 can be referenced for displaying the routing entries that match
an ACL rule.
ACLs 2000 to 3999 can be referenced for displaying the FIB entries that match an
ACL rule.
ACLs 2000 to 3999 can be referenced for connecting a TFTP client to the TFTP
server.
The functions that reference system ACL rules include:
802.1x function (after 802.1x is enabled globally and on a port, ACL rules are
referenced to apply)
Cluster function (the function is enabled by default. ACL rules are referenced to
apply to all ports). ACL 3998 and ACL 3999 are reserved for cluster management,
and cannot be configured.
DHCP snooping (after the function is enabled, ACL rules are referenced to apply
to all ports)
Port isolation (If the function is configured and a virtual interface is available, ACL
rules are referenced to apply)
MAC+IP port binding (after the function is configured on a port, ACL rules are
referenced to apply)
Flexible QinQ (after this function is configured on a port, the ACL rules within the
configured range are referenced to apply)
Voice VLAN (if Voice VLAN is enabled on a port and an OUIMAC is available, ACL
rules are referenced to add)
Chapter 2 Examples of QACL Configuration
2-10