H3C LS-5100-16P-SI-OVS-H3 Configuration page 281

QinQ
H3C Low-End Ethernet Switches Configuration Examples
[S3600-1-Ethernet1/0/25] port hybrid vlan 100 101 102 200 201 202 500 tagged
# Configure Ethernet 1/0/25 to set its TPID to 9100.
[S3600-1-Ethernet1/0/25] vlan-vpn tpid 9100
Configure S3600-2
Because the position of the S3600-2 on the network is the same as that of the S3600-1,
you can configure basic QinQ and selective QinQ on the S3600-2 as you have done on
the S3600-1. Note that:
Ethernet 1/0/15 of S3600-2 corresponds to Ethernet 1/0/10 of S3600-1.
Ethernet 1/0/20 of S3600-2 corresponds to Ethernet 1/0/20 of S3600-1.
Ethernet 1/0/10 of S3600-2 corresponds to Ethernet 1/0/10 of S3600-1.
Configure the devices at the core
The configuration on the devices at the core involves the ports interconnecting the core
devices and the ports connecting to the S3600-1 and the S3600-2. Your configuration
must ensure that the core devices can send traffic of SVLANs (100 through 102, 200
through 202, and 500) without removing the outer VLAN tag.
Chapter 2 Configuration Examples
2-7