H3C LS-5100-16P-SI-OVS-H3 Configuration page 107

Routing
H3C Low-End Ethernet Switches Configuration Examples
Table 1-8 Set additional routing metric
Enter system view
Enter interface view
Set the additional routing
metric to be added for
incoming RIP routes on
this interface
Set the additional routing
metric to be added for
outgoing RIP routes on
this interface
V. Configuring RIP route summarization
Table 1-9 Configure RIP route summarization
Enter system view
Enter RIP view
Enable RIP-2 automatic
route summarization
VI. Disabling the router from receiving host routes
Table 1-10 Disable the router from receiving host routes
Enter system view
Enter RIP view
Disable the router from
receiving host routes
Operation
system-view
interface interface-type
interface-number
rip metricin value
rip metricout value
Operation
system-view
rip
summary
Operation
system-view
rip
undo host-route
Command
Command
—
—
Required
By default, RIP-2 automatic route
summarization is enabled.
Command
1-5
Chapter 1 Routing Overview
Remarks
—
—
Optional
By default, the additional
routing metric added for
incoming routes on an
interface is 0.
Optional
By default, the additional
routing metric added for
outgoing routes on an
interface is 1.
Remarks
Remarks
—
—
Required
By default, the router
receives host routes.