Multicast
H3C Low-End Ethernet Switches Configuration Examples
II. Configuring IGMP-Snooping timers
Follow these steps to configure IGMP-Snooping timers:
To do...
Enter system view
Configure an aging
timer of router port
Configure a
response-to-query
timer
Configure an aging
timer of a member
port of a multicast
group
III. Configuring fast leave processing
1)
Configure fast leave processing in system view
Follow these steps to configure fast leave processing in system view:
Enter system view
Configure fast leave
processing
2)
Configure fast leave in Ethernet port view
Follow these steps to configure fast leave processing in Ethernet port view:
Enter system view
Enter Ethernet port view
Configure fast leave
processing
IV. Configuring a multicast group filter
1)
Configure a multicast group filter in system view
Use the command...
system-view
igmp-snooping
router-aging-time
seconds
igmp-snooping
max-response-time
seconds
igmp-snooping
host-aging-time
seconds
To do...
system-view
igmp-snooping
fast-leave [ vlan
vlan-list ]
To do...
system-view
interface interface-type
interface-number
igmp-snooping
fast-leave [ vlan
vlan-list ]
Chapter 1 Multicast Protocol Overview
Use the command...
Use the command...
1-4
Remarks
—
Optional
By default, the router port
aging time is 105 seconds.
Optional
By default, the maximum
response-to-query time is 10
seconds.
Optional
By default, the aging time of
the multicast group member
port is 260 seconds.
Remarks
—
Required
Disabled by default
Remarks
—
—
Required
Disabled by default