H3C LS-5100-16P-SI-OVS-H3 Configuration page 79

SSH
H3C Low-End Ethernet Switches Configuration Examples
Operation
Configure
public key
Return to public key
view from public key
edit view
Exit public key view
and return to system
view
Specify the host key
name of the server
Start
establish a connection
with an SSH server
server Enter the content of the public
key
public-key-code end
peer-public-key end
ssh
server-name
rsa-key keyname
ssh2 { host-ip | host-name }
[ port-num ] [ prefer_kex
{
dh_exchange_group
prefer_ctos_cipher { des |
the client to
aes128
prefer_stoc_cipher { des |
aes128
prefer_ctos_hmac { sha1 |
sha1_96 | md5 | md5_96 } |
prefer_stoc_hmac { sha1 |
sha1_96 | md5 | md5_96 } ] *
Chapter 2 SSH Configuration Commands
Command
client { server-ip
} assign
dh_group1
}
}
}
2-9
Description
When you input the key
data, spaces are allowed
between the characters
you input (because the
system can remove the
spaces automatically);
you can also
<Enter> to continue your
input at the next line. But
the key you input should
be a hexadecimal digit
string coded in the public
key format.
When you exit public key
code view, the system
automatically saves the
public key
—
Optional
Required when the SSH
client does not support
| first-time authentication
You need to copy the
server public key to the
SSH client
performing
configuration.
Required
|
|
In this command, you can
also specify the preferred
|
key exchange algorithm,
encryption algorithms
|
and HMAC algorithms
between the server and
client.
press
before
this