H3C LS-5100-16P-SI-OVS-H3 Configuration page 130

Routing
H3C Low-End Ethernet Switches Configuration Examples
Operation
Configure the peers to
advertise community
attribute to each other
Specify routing policy
for the routes exported
to the peer group
XIII. Configuring BGP RR
Table 1-13 Configure BGP RR
Enter system view
Enter BGP view
Configure the local router
as the RR and configure
the peer group as the
client of the RR
Enable route reflection
between clients
Configure cluster ID of an
RR
XIV. Configuring BGP Confederation
Table 1-14 Configure BGP confederation
Enter system view
Enter BGP view
peer group-name
advertise-community
peer group-name
route-policy
route-policy-name export
Operation
system-view
bgp as-number
peer group-name
reflect-client
reflect between-clients
reflector cluster-id
cluster-id
Operation
Command
Required
By default, no community
attribute or extended
community attribute is
advertised to any peer group.
Required
By default, no routing policy
is specified for the routes
exported to the peer group.
Command
Command
system-view
bgp as-number
1-28
Chapter 1 Routing Overview
Description
Description
—
—
Required
By default, no RR or its
client is configured.
Optional
By default, route reflection
is enabled between
clients.
Optional
By default, an RR uses its
own router ID as the
cluster ID.
Description
—
—