Configuration Guide; Configuring Basic Vlan Settings - H3C LS-5100-16P-SI-OVS-H3 Configuration

VLAN
H3C Low-End Ethernet Switches Configuration Examples

1.2 Configuration Guide

Note:
The configuration procedure differs by device. In this guide, the S3600 series are
taken as an example. For how to configure VLAN on other models, refer to their
accompanied operation manuals.
The configuration example in this guide provides only basic configuration
procedures. For detailed information about the involved functions, refer to the
corresponding operation manual and command manual.

1.2.1 Configuring Basic VLAN Settings

The H3C series switches support IEEE 802.1Q VLAN. The technology allows you to
organize Ethernet ports into virtual workgroups by assigning them to different VLANs.
Follow these steps to create a VLAN and perform basic VLAN configuration:
Enter system view
Create multiple VLANs in
bulk
Create a VLAN and enter
VLAN view
Assign a name for the
current VLAN
Configure the description
of the current VLAN
Display VLAN information
You can assign a port to a VLAN in Ethernet port view or in VLAN view.
Follow these steps to assign a port to a VLAN in VLAN view:
To do...
system-view
vlan { vlan-id1 to vlan-id2
| all }
vlan vlan-id
name text
description text
display vlan [ vlan-id [ to
vlan-id ] | all | dynamic |
static ]
Use the command...
1-2
Chapter 1 VLAN Overview
Remarks
—
Optional
Required
By default, only one
default VLAN (VLAN 1)
exists in the system.
Optional
By default, the name of a
VLAN is its VLAN ID, for
example, VLAN 0001.
Optional
By default, the description
of a VLAN is its VLAN ID,
for example, VLAN 0001.
Available in any view