Configuration Procedure - H3C LS-5100-16P-SI-OVS-H3 Configuration

QinQ
H3C Low-End Ethernet Switches Configuration Examples
Port
Ethernet
1/0/25
Note:
As the core devices on the service provider network can recognize the TPID 9100 only,
you should change the TPID that the ports will use in the outer VLAN tags from 8100
(the default) to 9100 for interoperability sake.
II. Configuration on S3600-2
Figure 2-3 Configuration on S3600-2
Configure Ethernet 1/0/15 and Ethernet 1/0/20 to forward the traffic from the service
provider network with the outer VLAN tag removed.
Basic QinQ and selective QinQ are required for S3600-2 to receive customer traffic.
The configurations on S3600-2 are similar to those on S3600-1.

2.1.4 Configuration Procedure

I. Devices and software version used
The S3600 series, software version Test 1545.
QinQ function
Set the TPID on the
port to 9100
2-4
Chapter 2 Configuration Examples
For inbound traffic
Inner-outer VLAN
mappings (CVLANs
to SVLAN)
—
For outbound
traffic
Forward traffic with
VLAN tags.