H3C LS-5100-16P-SI-OVS-H3 Configuration page 234

Multicast
H3C Low-End Ethernet Switches Configuration Examples
[SwitchD-msdp] peer 192.168.3.2 connect-interface vlan-interface 102
[SwitchD-msdp] quit
# Configure MSDP peers on Switch F.
[SwitchF] msdp
[SwitchF-msdp] peer 192.168.3.1 connect-interface vlan-interface 102
[SwitchF-msdp] quit
When the multicast source Source 1 sends multicast information, receivers in PIM-SM2
and PIM-SM3 can receive the multicast data. You can use the display msdp brief
command to view the brief information of MSDP peering relationships between the
switches. For example:
# View the brief information about MSDP peering relationships on Switch C.
[SwitchC] display msdp brief
MSDP Peer Brief Information
Peer's Address
192.168.1.2
# View the brief information about MSDP peering relationships on Switch D.
[SwitchD] display msdp brief
MSDP Peer Brief Information
Peer's Address
192.168.3.2
192.168.1.1
# View the brief information about MSDP peering relationships on Switch F.
[SwitchF] display msdp brief
MSDP Peer Brief Information
Peer's Address
192.168.3.1
# View the detailed MSDP peer information on Switch C.
[SwitchC] display msdp peer-status
MSDP Peer 192.168.1.2, AS 200
Description:
Information about connection status:
State: Up
Up/down time: 00:15:47
Resets: 0
Connection interface: Vlan-interface101 (192.168.1.1)
Number of sent/received messages: 16/16
Number of discarded output messages: 0
Elapsed time since last connection or counters clear: 00:17:51
Information about (Source, Group)-based SA filtering policy:
Import policy: none
State Up/Down time
Up 00:12:27
State Up/Down time
Up 00:15:32
UP 00:06:39
State Up/Down time
UP 01:07:08
2-25
Chapter 2 Multicast Protocol Configuration
AS SA Count
200 13
AS SA Count
200 8
100 13
AS SA Count
200 8
Examples
Reset Count
0
Reset Count
0
0
Reset Count
0