H3C LS-5100-16P-SI-OVS-H3 Configuration page 209

Multicast
H3C Low-End Ethernet Switches Configuration Examples
5) Configure a filtering rule for receiving or forwarding SA messages
Follow these steps to configure a filtering rule for receiving or forwarding SA messages:
Enter system view
Enter MSDP view
Configure a filtering rule
for receiving or forwarding
SA messages
Configure the minimum
TTL required for an
SA-encapsulated
multicast packet to be
forwarded to the specified
MSDP peer
To do...
system-view
msdp
peer peer-address
sa-policy { import |
export } [ acl acl-number ]
peer peer-address
minimum-ttl ttl-value
Chapter 1 Multicast Protocol Overview
Use the command...
1-18
Remarks
—
—
Optional
By default, no filtering rule
is configured for receiving
or forwarding SA
messages, namely, all SA
messages from MSDP
peers will be accepted or
forwarded.
Optional
The system default is 0.