H3C LS-5100-16P-SI-OVS-H3 Configuration page 158

Routing
H3C Low-End Ethernet Switches Configuration Examples
Device
S300
S300_A
S300_B
Figure 3-2 Network diagram for RIPv2 configuration
Configure S300.
# Run RIP on the interface with the IP address 206.1.4.0.
<S300> system-view
[S300] rip
[S300-rip] network 206.1.4.0
# Disable RIPv2 route summarization.
[S300-rip] undo summary
[S300-rip] quit
# Run RIPv2 on VLAN-interface 14.
[S300] interface vlan-interface 14
[S300-Vlan-interface14] rip version 2
[S300-Vlan-interface14] quit
Configure S300_A.
# Run RIP on the interfaces on networks 206.1.4.0 and 166.1.0.0.
<S300_A> system-view
[S300_A] rip
[S300_A-rip] network 206.1.4.0
[S300_A-rip] network 166.1.0.0
# Disable RIPv2 route summarization.
[S300_A-rip] undo summary
[S300_A-rip] quit
Chapter 3 Comprehensive Configuration
Interface
Vlan-int 14
Vlan-int 14
Vlan-int 662
Vlan-int 665
Vlan-int 662
Vlan-int 623
Vlan-int 624
3-5
Example
IP address
206.1.4.2/24
206.1.4.1/24
166.1.2.1/24
166.1.5.2/24
166.1.2.2/24
162.1.3.1/24
162.1.4.1/24