H3C LS-5100-16P-SI-OVS-H3 Configuration page 78

SSH
H3C Low-End Ethernet Switches Configuration Examples
Operation
Specify
interface for the SSH
client
II. Enabling first-time authentication
Table 2-8 Enable first-time authentication
Operation
Enter system view
Enable
authentication
Establish a connection
with the SSH server
III. Disabling first-time authentication and manually configuring the server
public key
Table 2-9 Disable first-time authentication and manually configure the server public
key
Operation
Enter system view
Disable
authentication
Enter public key view
Enter public key edit
view
a source
ssh2
interface-type interface-number
system-view
first-time
ssh client first-time enable
ssh2 { host-ip | host-name }
[ port-num
{
dh_exchange_group
prefer_ctos_cipher
aes128 } | prefer_stoc_cipher
{ des
prefer_ctos_hmac
sha1_96 | md5 | md5_96 } |
prefer_stoc_hmac
sha1_96 | md5 | md5_96 } ] *
system-view
first-time
undo ssh client first-time
rsa
keyname
public-key-code begin
Chapter 2 SSH Configuration Commands
Command
source-interface
Command
] [ prefer_kex
dh_group1
}
{ des
| aes128
{ sha1
{ sha1
Command
peer-public-key
2-8
Description
Optional
Description
—
Optional
Enabled by default
Required
In this command,
you can
|
specify
|
preferred
|
exchange
algorithm,
} |
encryption
|
algorithms
HMAC algorithms
|
between the server
and client.
Description
—
Required
Enabled by default
Required
—
also
the
key
and