H3C LS-5100-16P-SI-OVS-H3 Configuration page 116

Routing
H3C Low-End Ethernet Switches Configuration Examples
Configure the maximum
number of OSPF ECMP
routes
XI. Configuring OSPF to Redistribute External Routes
Table 1-32 Configure OSPF to redistribute external routes
Enter system view
Enter OSPF view
Configure OSPF to
redistribute routes from
another protocol
Configure OSPF to filter
outgoing routes
Enable OSPF to import
the default route
Configure the default
parameters for
redistributed routes,
including cost, interval,
limit, .tag, and type
XII. Configuring OSPF Timers
Table 1-33 Configure OSPF timers
Enter system view
Enter interface view
Operation
multi-path-number value
Operation
system-view
ospf [ process-id
[ router-id router-id ] ]
import-route protocol
[ process-id ] [ cost value
| type value | tag value |
route-policy
route-policy-name ] *
filter-policy { acl-number
| ip-prefix
ip-prefix-name } export
[ protocol ]
default-route-advertise
[ always | cost value |
type type-value |
route-policy
route-policy-name ]*
default { cost value |
interval seconds | limit
routes | tag tag | type
type } *
Operation
system-view
interface interface-type
interface-number
Command
Command
Command
1-14
Chapter 1 Routing Overview
Remarks
Optional
3 by default.
Remarks
—
—
Required
By default, OSPF does
not import the routing
information of other
protocols.
Optional
By default, OSPF does
not filter advertised
routes.
Optional
By default, OSPF does
not import the default
route.
Optional
These parameters
respectively default to:
Cost: 1
Interval: 1 (second)
Limit: 1000
Tag: 1
Type: 2
Remarks
—
—