User Authority - Sony IPELA PCS-G50 Technical Documentation Manual

Integration with Sony Network Camera

User Authority

©2008 Sony Corporation
For the reasons outlined below, do not connect to network cameras used for
monitoring. It is recommended that network cameras be installed exclusively for
videoconferencing.
• The PCS-G50/G70 does not support JPEG. JPEG recording may stop when the
PCS-G50/G70 is connected to a monitoring system where Sony Recorder
Software (RealShot Manager, IMZ series), Sony Network Recorder (NSR series),
etc. is used.
• Connecting a video communication terminal to a network camera used for fixed
monitoring and far-end controlling may result in a loss of monitoring
information.
When the SNC-RX550N/RX550P is installed on a desktop, the video image will be
displayed upside down. The PCS-G50/G70 has no vertical flip function.
(This image illustrates the connection between video communication terminals and network cameras.
The screen image is simulated.)
Multiple users can be registered for a Sony network camera, and a name,
password and authority can be specified for each user. Connection from the
PCS-G50/G70 to a network camera is made using a predefined user name and
password. The operation and settings for a network camera can be limited based
on the user authority.
Network Camera User Authority
Table 1 shows the functions available for the administrator and user authorities.
Note
Only those functions related to PCS integration are listed.
VIDEO COMMUNICATION SYSTEM - TECHNICAL DOCUMENTATION
February, 2008 / Ver 1.0 5