Identify A User - Sony IPELA PCS-HG90 Operating Instructions Manual

Identify a user

Once you reach the Web page, the following window will be displayed asking
you to identify yourself as the user.
Enter one of the following user names (see below) into the "User Name" box
and the corresponding password into the "Password" box, then click the [OK]
button.
Each character of a password is shown as "*" on the screen.
When the user name and password are correct, the "Dial/Disconnect" page will
come up. If an incorrect user name or password is entered three times, an error
message appears on the screen.
Notes on the user name and the password
• When you enter "user" in the "User Name" box and then its password
(Remote Access Password) in the "Password" box, you can access and check
the "Phone Book" and "Setup" pages.
• When you enter "super" in the "User Name" box and then its password
(Phone Book Modification Password) in the "Password" box, you can access
the "Phone Book" page, change the setting of the page, and register a new
entry onto the page. And you can check the "Setup" page.
• When you enter "sonypcs" in the "User Name" box and then its password
(Administrator Password) in the "Password" box, you can access the "Phone
Book" page, change the setting of the page, and register a new entry onto the
page. And you can check and modify the "Setup" page.
• If the corresponding password is not assigned, leave the "Password" box
blank and click the [OK] button.
• Administrator Setup Password, Phone Book Modification Password, and
Remote Access Password settings are in the Administrator Setup menu.
145
Identify a user