Starting A Point To Multi-Point Meeting; Registering A Multipoint Conference In The Multipoint Connection List - Sony PCS-1600 Operating Instructions Manual

Starting a Point to Multi-Point
Meeting
You can hold a point to multi-point meeting among four
terminals (including this terminal). You can add one normal
audio phone in the network.
Notes
• Before you start a meeting verify that Multipoint Mode is set
• When you establish a connection with a party marked with a
Registering a Multipoint Conference in the Multipoint
connection list
Setting up a new Multipoint connection list
1
2
3
4
to On in the Multipoint Setup menu.
Multipoint mark, or with parties on the Multipoint list, the
status of the internal Multipoint setting is ignored, and the
connection is made using the internal Multipoint mode.
Press the Phone Book button on the Remote Commander.
The Phone Book menu appears.
Select New Entry with the joystick on the Remote
Commander, then press the joystick down.
The List Edit menu appears.
List Edit
Index:
A1:
A2:
B1:
B2:
C1:
C2:
Enter the name of the remote party in the Index box.
Select [ ISDN] in Line I/F.
Chapter 6 Meetings With the Multipoint Function
ISDN
Line I/F:
ISDN
Number of Lines:
6B
Prefix:
Prefix-None
Restrict:
Auto
Save Cancel
(Continued)
131