Using The Lan Cascade And Isdn Connection - Sony IPELA PCS-G70 Operating Instructions Manual

Using the LAN cascade and ISDN connection

Installing both the PCSA-M3G70 H.323 and PCSA-M0G70 H.320 MCU
software in two Communication Terminals enables cascade connection
including two main terminals. Connecting four terminals to one main terminal
allows you to conduct a multipoint videoconference via a LAN and ISDN with
up to ten points.
PCSA-M3G70
PCSA-M0G70
*Be sure to connect two Communication Terminals, with the MCU software installed, via a LAN.
Notes
• Be sure to make connection between two Communication Terminals via LAN. Even
if the PCSA-M0G70 H.320 MCU software is installed in both the Terminals, cascade
connection via an ISDN is not available.
• For cascade connection, the "Split" and "Split (Fixed)" modes are not available. Only
the "Voice Activate" mode is available.
• The remote parties must be using the PCS-1/1P, PCS-G50/G50P, PCS-G70/G70P, or
PCS-TL50/TL50P as their main terminal.
LAN *
PCSA-M3G70
PCSA-M0G70
Connection Examples for a Multipoint Videoconference
209